CoSHH Legislation and Personal Protective Equipment (PPE) - Eye and Face Protection
Posted: Friday, April 02, 2010
by Dale
Ethos Solution Ltd
Employers have a duty to provide the use of personal protective equipment (PPE) at work in line with CoSHH procedures.
PPE is defined according to HSE Regulations as 'all equipment which is intended to be worn or held by a person at work and which protects him against one or more risks to health or safety' for example, eye protection, gloves, safety helmets, high visibility clothing and safety footwear.
There are three alternative types of eye and face protection.
These are:
Safety spectacles - May look like separate lenses in a frame (similar to prescription glasses) or may be worn over ordinary spectacles (Eye shields). These are suitable for workshop or laboratory use for protection against light chemical splashes.
Goggles - These have a flexible plastic frame with an elastic headband. They give total protection to the eyes and the rim is in complete contact with the face. Some goggles are vented but are not recommended in case of dangerous chemical splash or protection against gases and fine dusts. Vented goggles are an alternative option but are prone to misting up.
Face shields - They have a single large lens with a frame and modifiable head harness or are fixed to a helmet. They protect the whole face as well as the eyes although they do not fully enclose the eyes. As such, they don't provide protection against dusts and gases.
Some examples of CoSHH hazards requiring the use of eye and face protection:
-Splashes from chemicals as a result of contact with certain substances
-Working with tools which generate dust or debris that could fly into the face
-Mist from machines using gas or vapour under pressure or high-pressure cleaning machines
-Intense heat or light and radiation from lasers or from welding and ovens
Maintenance of the eye and face protection:
The eye/face protection must fit the user and not fall off easily. Safety glasses and goggles should be issued on a personal basis.
Do not use when the lenses are dirty or scratched as this will impair vision leading to eye strain and possible accidents.
Before the lenses are issued to another user they should be wet cleaned and stored in a protective case.
Bear in mind misting/fogging of the lenses. An alternative option to consider is anti-mist and ventilated eye protection.
Replace face shields should they become worn and replace them.
The above guide falls in line with CoSHH procedure which protects employees from health and safety risks at work.
--------
Dale Allen delivers CoSHH compliance as one of the UK's leading compliance authorities. Find out more about how you can use his online COSHH365 CoSHH asssessment tool to produce compliant CoSHH assessments with the benefits of a managed Safety Data Sheet library.
This Article has been viewed 591 times. (Not updated in real-time.)
No comments yet.We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.